Festo Actuator semi-rotary drive DFPD-40-RP-90-RD-F0507 Part number: 8047615

Description

Part number: 8047615
Pack of 1 pcs Actuator
Size of actuator
40
Flange hole pattern
F0507
Swivel angle
90 deg
End-position adjustment range at 0°
-5 ... 5 deg
End-position adjusting range at nominal swivel angle
-5 ... 5 deg
Shaft connection depth
16 mm
Fitting connection conforms to standard
ISO 5211
Assembly position
Any
Mode of operation
double-acting
Design structure
Rack and pinion
Closing direction
right-closing
Valve connection conforms to standard
VDI/VDE 3845 (NAMUR)
Connection for positioner and position sensor conforms to standard
VDI/VDE 3845 size AA 1
Component suitable for safety functions
Safety device
Safety function
Execute working stroke in defined time
Safety Integrity Level (SIL)
Product can be used in SRP/CS up to SIL 2 low demand
Up to SIL 3 in redundant architecture
up to SIL 1 high demand mode
Certified for safety function to ISO 13849 and IEC 61508 (SIL)
Product can be used in SRP/CS up to SIL 2 low demand
up to SIL 1 high demand mode
Up to SIL 3 in redundant architecture
Operating pressure MPa
0.2 ... 0.8 MPa
Operating pressure
2 ... 8 bar
29 ... 116 psi
Nominal operating pressure
0.55 MPa
5.5 bar
Nominal operating pressure (psi)
79.75 psi
Maritime classification
see certificate
CE mark (see declaration of conformity)
to EU directive explosion protection (ATEX)
Certificate issuing department
DNVGL TAP00001CE
TÜV Rheinland 968/V 1106.00/19
ATEX category Gas
II 2G
ATEX category Dust
II 2D
Explosion ignition protection type Gas
Ex h IIC T4 Gb X
Explosion ignition protection type Dust
Ex h IIIC T105°C Db X
Explosion-proof ambient temperature
-20°C <= Ta <= +80°C
Operating medium
Compressed air in accordance with ISO8573-1:2010 [7:4:4]
Note on operating and pilot medium
Pressure dew point 10°C below ambient temperature/temperature of medium
Lubricated operation possible (subsequently required for further operation)
Corrosion resistance classification CRC
2 - Moderate corrosion stress
Storage temperature
-20 ... 60 °C
Ambient temperature
-20 ... 80 °C
Torque at rated operating pressure and 0° rotation angle
38.3 Nm
Torque at nominal operating pressure with 90° swivel angle
38.3 Nm
Note about the torque
The operating torque of the actuator must not be higher than the maximum permissible torque listed in ISO 5211, with reference to the size of the mounting flange and of the coupling.
Mean Time to Dangerous Failure (MTTFd)
1126 years
Probability of Failure per Hour in [1/h].
1.01 * 10
-07
PFD (Probability of Failure on Demand)
1.42 * 10
-03
Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0°
3.4 l
Product weight
1,882 g
Shaft connection
T14
Pneumatic connection
G1/8
Materials note
Conforms to RoHS
Material of connecting plate
Anodised wrought aluminium alloy
Material cover
Die-cast aluminium, coated
Material seals
NBR
Material housing
Anodised wrought aluminium alloy
Material piston
Aluminium die cast
Material bearing
POM
Material cam
Stainless steel casting
Material screws
High alloy steel, non-corrosive
Material shaft
Steel, nickel-plated
If Item Comes under your country custom then Buyer will be fully responsible for custom charges, we will not accept return or refund request